Tips for 18-Volt Power Tool Battery Chargers

Power tool Battery charger is seldom wrong, because it won't have any moving parts. It contains only single copper wire winding of power supply socket voltage, in order to reduce the need for voltage, charging power tools battery. The BOSCH 2607336040 18v battery, so only one, sometimes two battery charger, the user maintenance parts: fuse plug connection to the external power supply and battery chargers ammunition, if it has a seal of the unit.

http://www.sales-batteries.com/bosch-2607336040.htm

1. Insert the power supply of 18v BOSCH 2607336040 power tools battery charger. Open the charger.
2. Use multimeter measuring voltage. The set range for 10 to 30 v voltage, if it has a variable voltage Settings
3. Connecting two lines extended to 18 v 2607336040 drill battery terminal multimeter. A line is active red and other black is negative, there is at the end of the small metal sensor or jig.
4. Sensors placed to the metal terminal battery charger red wire. Will the sensor line, outer metal terminal battery charger. Note: terminal marked as "+" and "-" denotes positive and negative respectively.
5. See multimeter is displayed on the voltage measurement. It reads 18 v, if the 2607336040 tool battery charger normal operation and production cost. If is the production charge, it may need to inspect or replace the battery. If it does not produce cost, check the charger too, if it has a.
6. Remove the fuse cover, cover under lip insert a small screwdriver, and then the closed. From the multimeter two wire will be the end of the year to every fuse at the end of sensor. Check the multimeter. You will receive a voltage readings, if not blow the fuse.
This may be because you haven't complete the circuit less than 18 v; You are testing check, if electricity is through the flows through fuse. If you get a reading, and then power not terminal, it is an internal fault, so you need to get it by a professional inspection. If not a reading, fuse may be burn out, replacing the fuse.
7. Replacing the fuse cover. Repeated examination, using a multimeter to contact before BOSCH 2607336040 power tool battery ( Click Here ) terminals. If you read, you of the charger is the fuse charger. If there's anything you haven't reading, you need to check the plugin detonator.
8. Plug from the socket delete. Pry out use small screwdriver plug at the bottom of the fuse seat fuse. Delete from the holder of the fuse. Need to replace the fuse, the use of a new with the same current rating.
9. Plug into the socket. Repeated use multimeter testing and contact as the old power tool battery terminal. If your reading, it is fuse plug and charger work. If there's anything you haven't read, charger is dead, need to replace or repair.

Traceback: http://digitalproductsreview.yolasite.com/power-tool/fix-bosch-2607336040-18v-power-tool-battery-chargers